Test ecoDry Banner 1

SWISS COMBI Test ecoDry - Superheated Steam Drying

Mobile pilot dryer for bulk goods

The gentle drying process with indirect heated steam is very well suitable for various bulk solids. The ecoDry technology already has a bright area of application for drying of different biomass products. However, there are still many more possibilities to take advantage of this high end technology. With our test ecoDry plant you have the chance to run drying tests either at your facilities or at our headquarters in order to extensively test the suitability of the ecoDry for an industrial scale scenario.

The pilot plant is equipped with a modern control system including visualisation and touch screen panel. The control system works automatically and barely differes from the control system of an industrial scale ecoDry plant.

If you are interested in running drying tests for your products, we are happy to help with further information.

Here you can find a short demonstration of the pilot ecoDry

Technical data Test ecoDry

  • Water evaporation:                             ca. 100kg/h
  • Drying temperature:                              ca. 400°C
  • Exhaust gas temperature:                     ca. 160°C
  • Fuel:                                              Diesel / fuel oil
  • Water content dry product:                       min. 5%
  • Variable water content of wet product due to dry product backmixing
  • Ratio of liquids e.g. Syrup can be mixed
  • Motors are equipped with VFD
  • Trends of installed sensors are recorded
  • Various instrument nozzles are ready to be used

 

  • SWISS COMBI ecoDry indirect heated drum dryer
  • SWISS COMBI ecoDry indirect heated drum dryer
  • SWISS COMBI ecoDry indirect heated drum dryer
  • SWISS COMBI ecoDry indirect heated drum dryer
  • SWISS COMBI ecoDry indirect heated drum dryer
  • SWISS COMBI ecoDry indirect heated drum dryer

SWISS COMBI - Pilot Belt Dryer

Mobile belt dryer for drying tests of bulk solids

Our mobile pilot belt dryer can mainly be used for feasibility studies in terms of using the belt drying technology in a continuous and industrial scale drying project. Additionally, it serves for demonstration purposes to show the procedure of industrial drying by using low temperature heat. 

Our pilot belt dryer can be used for tests in order to evaluate the efficiency as well as the actual drying process. The tests can either be done at your facilities or at SWISS COMBI heatquarters respectively. 

Technical data pilot belt dryer

max. water evaporation rate:               ca. 90kg/h
max. drying temperature:                           110°C
max. wet product water content:             ca. 75%
min. residual moisture:                            ca. 10%
space required:                                ca. 5m x 3m
buffer in dosing bin:                             ca. 10 min
heat source:                          2 x propane burner

All motors are equipped with VFD

Pilot belt dryer in operation
Pilot belt dryer in operation
SWISS COMBI pilot belt dryer
SWISS COMBI pilot belt dryer